Xbox 360 Repair Under One Hour!
Having an Xbox 360 system break on your can be truly frustrating. The system will entirely shut down, not letting you access anything. Sometimes, your discs will get stuck in the system as well. If you send it in for repairs, you'll end up waiting quite a while to get the console back. On top of this, they will charge you an arm-and-a-leg for repairs that they will not even guarantee. If you teach yourself to perform your own Xbox 360 repair, however, you will be able to quickly and efficiently fix any of the problems you come across.
When a problem occurs with an Xbox 360, there is over a 90% chance that you will be able to fix the problem. If you know what you are doing, making this repair will not be an issue. The 3 Red Light error will not have to give you aggravation anymore.
If something goes wrong with your Xbox 360, you should find a guide which can help you to figure out what is wrong with your console. Taking the machine apart and playing with the pieces could only damage it more. You should follow very detailed steps to make sure that you are doing exactly the right thing with your repairs.
It should be noted that if your Xbox 360 is still under warranty, you should have it returned for official repair. These repairs will be fully covered by the warranty and if the problem is not repairable, your machine will be replaced. Otherwise, if you open your console to repair it yourself before discovering that you can't, the conditions of your warranty will be void.
If using the warranty is not an option, however, you should take matters into your own hands. Removing the protective casing is going to be the first step to repairing your Xbox 360. If you do not learn how to properly open the console, you only risk causing more damage.
Taking off the faceplate will be the first step to removing the protective casing from the console. Both the top and the bottom connect into this faceplate and trying to remove either of those pieces first can snap the protections holding them into place. The faceplate can easily be removed using the hole positioned at the bottom.
Removing the bottom portion will be the next step. There are six different tabs which hold the plate in position. Using a tool, you can locate these tabs inside of the vent holes. Applying slight pressure on the tabs and pulling gently will help to unlock this panel.
The top panel will be harder to remove although you will do it in the same manner. The drive tray holds the first two tabs while the second pair can be accessed through the vent holes. You will find the final two by removing the feet from the back of the Xbox. Once you have this panel off as well, you should be able to easily begin your efficient Xbox 360 repair and get your console up and running again!